Eliminates the possibility of breaking the shift pin case, this modification can be used as preventative maintenance
However it can also be used to repair the accident, before you go buying a new case you can simply use the Walsh LTR450 Shifter Modification.
.INSTALLATION DIRECTIONS.
1) DRAIN OIL
2) DRAIN COOLANT
3) REMOVE SHIFTER, THEN CIRCLIP ON GEARSHIFT SHAFT
4) REMOVE RIGHT SIDE COVER
5) REMOVE CLUTCH AND BASKET
6) REMOVE 2 PHILLIPS FLATHEAD SCREWS HOLDING DOWN FINGER
7) REMOVE 6MM NUT FROM GEARSHIFT CAM PLATE (DO NOT REMOVE PLATE)REPLACE WITH SUPPLIED NUT (BE SURE TO USE LOCKTITE)
8) SLIDE OUT SHIFT SHAFT
9) REMOVE GEARSHIFT ARM STOPPER (PIN) AND WASHER
10) INSTALL PIN INTO NEW BRACKET WITHOUT WASHER (LOCKTITE) FROM COUNTERBORED SIDE
11) REINSTALL SHIFT SHAFT(ALIGN GEARS CENTRALLY)
12) INSTALL BRACKET OVER SHIFT SHAFT AND USE SUPPLIED SCREWS (LOCKTITE)
13) NOW REVERSE STEPS 5 -1
